On Sale
On Sale
RedSeven Amplification - LIL’WAVE - Analog Dual Chorus - Vibrato 200th unit anniversary
LilʼWave is the little brother of our SOLD OUT “The Wave – True Analog Multichorus” rack effect.
It takes one of the three original delay lines with two settings of RATE, INTENSITY and MIX. L.W. is an 100% analog mono chorus, it is for sure the deepest and richest sounding chorus pedal available. Weʼre on zero compromise on it, no digital simulation, no DSP, a pure 100% vintage and lush tone that is quite unique.
– Side 1 is where your vibrato sound is. Faster and deeper LFO than Side 2, with an unique approch. This side is also perfect with lower MIX setting for distorted sound.
– Side 2 is the classic evergreen “ʼ80s L.A. sound”. In “CLASSIC” mode the sound is fat, rich, and deep. “TSC” mode is where the magic happens. Instant ‘80s ballad presetted tone here, screeming of Mike, Dann and of course Luke. A truly unique journey between the Los Angeles golden era of session players.
Thereʼs no pedal in the market right now capable of this enormous sound quality and richness without any muddy or “over modulated” sound.
CONTROLS
- Rate 1 & 2: control the speed of the LFO;
- Intensity 1 & 2: control the amplitude of the LFO;
- Mix 1 & 2: mix between dry and wet signal. At 100% you have 25% dry / 75% wet;
- CLASSIC/TSC switch (operate only on MODE II): a selection between two
- different delays, CLASSIC is shorter and more “ensable”, TSC is longer, deeper and lush;
- ON/OFF: on/off for the effect. Truebypass relay bases bypass;
- MODE I & II: Here you can chose between two presetted values of Rate, Intensity and Mix controls
On Sale
On Sale
RedSeven Amplification -ALKEMY - Overdrive - Boost
Alkemy are two independent pedals in one box. Our classic boost circuit, 100% transparent and capable of +24dB clean volume boost. The Drive side is a state of the art boutique overdrive circut, the perfect way to push the front end of your amplifier to the next level.
Beside the three classics; VOLUME, TONE and GAIN, Alkemy offers two settings of clipping and a FAT/NORMAL switch for tons of sound combinations. This is pure magic.
This is not a clone of anything you will find out there, we have tuned the drive side of Alkemy to work either with a single channel amplifier or to add a nice gain stage in front of your already overdriven amp.
Last but not least, the “ORDER” switch, it allows you to select the order of the two effects. Basically you can have a boutique overdrive with a clean boost after, or the same overdrive but with a gain stage in front of it.
CONTROLS
- Volume: output volume control (drive side only);
- Tone: passive tone control (drive side only);
- Gain: gain control (drive side only);
- Boost: boost level (boost side only);
- FAT/NORMAL: choose between two different structures of gain (drive side only);
- CLIPPING: choose between two different styles of clipping, diode or LED (drive side only);
- ON/OFF: on/off for the overdrive side. Truebypass relay bases bypass.
- BOOST: on/off for the boost side. Truebypass relay bases bypass.
On Sale
On Sale
RedSeven Amplification - CHAOS THEORY - Distortion - Boost
Chaos Theory is thought to transform your single channel amplifier into a full three channel amplifier.
It have the classic layout like most of the amplifiers out there, plus a boost section (both volume and gain stages). VOLUME, TREBLE, MIDDLE, BASS and GAIN are used as on any standard amplifier, but when pushing the BOOST footswitch, you have a second choice for added GAIN and LEVEL for your solo parts.
Not a clone, Chaos Theory was thought of as a direct reply to many of our customers out there, who love to play their vintage single channel amplifiers, but are in need for some more gain options. FAT/NORMAL, this switch is a selection of two different gain levels for the whole pedal.
VINTAGE or MODERN. Set it flat or V shaped mid shift for the true metal heads.
CONTROLS
- Volume: output volume control;
- High: control for the high section of the eq;
- Middle: control for the mid section of the eq;
- Bass: control for the bass section of the eq;
- Gain: gain control;
- Boost Gain: gain control for boost side;
- Boost Level: boost level for boost side;
- FAT/NORMAL: choose between two diferent structures of gain;
- VINTAGE/MODERN: choose between two different shapes of mid frequencies, first one is flat and second one is scooped;
- ON/OFF: on/off for the effect. Truebypass relay bases bypass;
- BOOST: on/off for the boost side, which is dependent by the distortion side. If the pedal is in off mode, by turning on/off the boost side, nothing will happen.
To buy in America write to: pk@redseven-amplification.com
On Sale
On Sale
RedSeven Amplification - COMPULON PRO - Compressor
Following many requests of putting back in production the original Compulon pedal, we thought it was the right time to do, and with an improved version of it.
COMPULON PRO still an optical based compressor, sharing the basic circuit of the original design, but this time with a “two stages” mode compression for a better tracking of your dynamics.
We find optical designs in this appliccation still the best way to approach the concept of dynamic for guitar players in demand of control. From very subtle to fast“160x” type compressions, Compulon Pro offer a wide pallete of possibility.
It’s not over! We love tone and analog circuits, so like a proper studio mastering grade compressor, which one of the most peculiar characteristic still in the output stage, we chose to add C.S.S. (Coil Saturation System) in this design, which is a very particular circuit, act to mimic a real output transformer. By driving hard the knob, it will return in some nice and fat harmonic content, down to zero, for a nice touch of buffering and “something extra” to your tone.
Combining Compulon Pro with the new C.S.S. (Coil Saturation System) circuit, result of the next classic “always on” pedal on your clean to channel.
Compulon Pro is the most advanced and best sounding compressor pedal platform for both guitar and bass available right now.
CONTROLS
- Serial / Parallel mode: Compulon Pro works in both serial or parallel mode. If you’re in look for a sustained sound but keeping the nature of the pick attack, parallel mode is what you need. On the oppisite side, serial mode is to keep evey single signal peak under control.
- Input gain selector: high, mid and low. Three different characters, to shape even further sound possibilites.
- Volume / Blend: in serial mode this pot acts as output volume control, in parallel mode it acts as dry/wet control;
- Threshold: select the level of the threshold of compression circuit.
- S.S. Level: This is the level of Coil System Saturation, a specfic tuned ciruit to mimic the output transformers of the studio grade compressors. At minumum it acts as a buffer, perfect to keep as an “always on” pedal, by increasing you will fat your mids.
On Sale
On Sale
RedSeven Amplification - PHAT NICK BASS PREAMP
Phat Nick is the last bass preamp pedal you’ll ever need.
Born in collaboration with the amazing Italian bass studio player Nick Muneratti, was thought to meet the needs of bass players who have no ability to transport their amplifier at the gigs.
Class A and Active Equalization for the best tone possible.
Treble and Bass have gain and cut control. Mid have four selectable bands and gain/cut control.
Transformer balanced output with ground/lift switch for noiseless results.
CONTROLS
- Gain: gain control;
- Master: output volume control;
- Eq: Bass, Treble, Parametric Mid Control (400hz, 800hz, 1000hz, 2200hz);
- Mode (FAT/NORMAL);
- Mid Shape (PUSHED/FLAT);
- Balanced Output with ground lift switch;
- Footswitches: Master Eq Bypass, Mute/Tuner.
To buy in America write to: pk@redseven-amplification.com
On Sale
On Sale
RedSeven Amplification - STEREO MINI MIX
Double Stereo Line Mixer is a line level professional device for parallel processing, with a fixed mix of 50/50 (dry/wet).
Thought as the ultimate and most compact solution in the business to mix up to two stereo returns with incoming dry signal into a single stereo output.
To avoid any ground loop issue, sends and returns are transformer isolated.
The whole unit can operate at nominal +4db line level signal.
CONTROLS
Left Side
- INPUT (mono): this is the main input of the mixer, mono.
- OUT LEFT (mono): left output of the system. If only the left output is used (right output is not plugged in) the mixer will sum right and left into this output).
- OUT LEFT (stereo): right output of the system. If right output is plugged in, the stereo signal will be preserved as left and right on respective outputs.
Right Side
- SEND: this output will split incoming signal from INPUT to other two equal copy. If you use a mono connector, you will have one outgoing signal (on TIP), if you use a stereo connector you will have two equal copies of INPUT signal (first one on TIP, second one on RING).
- 9VDC: 9 volts negative center power supply connector. Use only high quality power supply with at least clean 100mA supply.
- FX1 RETURN: this input will accommodate the mono or stereo return of your first effect. If you’re using a mono effect, a mono cable will work, if you’re using a stereo output from your effect you must use a Y cable to accommodate left and right signal into FX1 RETURN jack.
To buy in America write to: pk@redseven-amplification.com
RedSeven Amplification - SMART PATCH
Smart Patch is the brain of your pedalboard, the ultimate professional solution for both studio and live environment.
Think of it as a central hub for all the audio connections from and to your board.
It’s smart (as the name suggest) because it allow to connect your board to your amp or amps configuration without touching a single cable.
- Auto routing features (you can connect your pedalboard with your amp/amps in many different ways, without touching a cable in your board);
- Dual input and output HIGRADE buffers, tuned specifically to avoid any possibile signal loss. Both buffers are bypassable;
- ISO transformer placed into the stereo output, to avoid any ground loop. We selected the best quality audio transformer available in the market;
- Phase reverse switch for stereo output, to flip 180° the signal in a very quickly and convenient way if needed;
- TRS Thru for channel switching or added thru signal path;
- MIDI thru;
- Small package and 9V negative center powered;
- 100% silent operation, no noise added.
On Sale
On Sale
RedSeven Amplification - DUALITY
Duality is a combination of our knowledge of tone, in a super compact and transportable format. Duality has two channels. One three-dimensional clean channel, inspired by the most famous vintage single channel amps and one rich, harmonic distorted channel with multiple gain stages that makes it one of the most versatile amplifiers on the market today. Duality represents the cutting edge and can be used in any context and in any genre, covering any sound between the crystal clean and the most thorough lead.
SPECIFICATIONS
- Channel 1: clean sound inspired by the early ‘60s single channel amplifiers. Volume, treble and bass, a switch for mid frequencies and a bright switch. Simple and functional controls;
- Channel 2: multi-stage distortion, true sonic nirvana. From the vintage ‘70s crunch tones to modern hi-gain in a single channel. Volume, treble, middle, bass, gain, bright, vintage / modern mode, and lead boost;
- High-voltage buffered effects loop; Double Master volume, for two steps of volume;
- MIDI communication (PC and CC) with intelligent internal saving;
- 50W of total output with EL 34 or 6L6 of your choice;
- Power and signal transformers designed by our specifications, made in Italy;
- Entirely designed, created, produced and assembled by hand in Italy by RedSeven Amplification;
- 46 x 24 x 24 cm in just 13 kilograms
On Sale
On Sale
RedSeven Amplification - LEVIATHAN - EX DEMO
The king of higain. The new reference point. The new standard for those seeking real Cruelty. Born for the need to go beyond the classic distorted sounds that is present in all modern amplifiers, hence making them cold and sterile. That is not the case here. Thanks to the continuing demands for something particularly powerful, Leviathan has seen the light. Originally thought of as an extreme higain – metal only oriented – amplifier that is suited perfectly for lower tunings. But instead it has been recognized to have a unique versatility that has rarely been heard before. This amp does it all.
The LEVIATHAN manages to switch from blues to more extreme rock/metal tones with the only use of your pick and the volume control of your guitar. The preamp features two channels, the first with a normal/hot mode for two selectable gain structures, suitable for blues as well as for more aggressive modern rhythm tones. The second channel on the other hand, delivers a high amount of gain, but still always maintaining an comprehensibility among all the notes, something thatʼs hardly ever heard before.
THE LEVIATHAN HAS AN INCREDIBLE STRING SEPARATION EVEN AT VERY HIGH GAIN. The power-amp is 4x KT88 based and has been especially designed and developed for this particular amplifier. It gives The LEVIATHAN a massive thickness and accuracy in pick response that is very hard to find in todayʼs huge market of amplifiers.
SPECIFICATIONS
- Channel 1: gain, treble, middle, bass, volume, normal / hot mode and bright switch;
- Channel 2: gain, high, middle,bass, volume and bright switch;
- Double Master volume, two step completely independent volumes;
- High-voltage buffered effects loop;
- Double Master volume, for two steps of volume;
- MIDI communication (PC and CC) with intelligent internal saving;
- 120W of total output with KT88;
- Power and signal transformers are designed by our specifications, made in Italy;
- Entirely designed, created, produced and assembled by hand in Italy by RedSeven Amplification;
On Sale
On Sale
RedSeven Amplification - PRO CAB 1X12
Pro Cabs are born to meet the demand of the guitarist who wants a definitive cabinet. This series of cabinets has been carefully designed for maximum sound performance and a small footprint without sacrificing anything that would rage on the final quality. All Pro Cabs are made of the finest quality 15mm birch plywood and are closed back.
1×12 and 2×12 models are equipped with properly calculated bass reflex, thanks to which it was possible to get a very large and clean response in bass and mid-bass frequencies, being able to reduce the size compared to a normal guitar cabinet.
4×12 model is built with pneumatic suspension technique, it does not need bass reflex. All these features gives Pro Cabs absolute flexibility. They can be used in any context and for any kind of music, especially in the more modern kind where the quality, cleanliness and precision are really important requirements.
On Sale
On Sale
RedSeven Amplification - PRO CAB 4X12 USATA
Pro Cabs are born to meet the demand of the guitarist who wants a definitive cabinet. This series of cabinets has been carefully designed for maximum sound performance and a small footprint without sacrificing anything that would rage on the final quality. All Pro Cabs are made of the finest quality 15mm birch plywood and are closed back.
1×12 and 2×12 models are equipped with properly calculated bass reflex, thanks to which it was possible to get a very large and clean response in bass and mid-bass frequencies, being able to reduce the size compared to a normal guitar cabinet.
4×12 model is built with pneumatic suspension technique, it does not need bass reflex. All these features gives Pro Cabs absolute flexibility. They can be used in any context and for any kind of music, especially in the more modern kind where the quality, cleanliness and precision are really important requirements.
On Sale
On Sale
RedSeven Amplification - DUALITY 100 - B-STOCK
Duality 100 is the avant-garde of our amp production. Three independent channels of pure bliss for the ears.
First channel is crystal clear, fat and never sterile, always ready to provide the clean sound inspired by the early ‘60s single channel amplifiers. Dualityʼs gain and volume controls guarantees to give you a multitude of tones.
Second channel, inspired by the “plexi sound”, has a vintage voice that easily manages to go from a semi-clean tone to a very powerful crunch with only the use of your right hand. Third channel is sonic, three-dimensional, rich and harmonic.
It has a high gain and is ready to explode tons of distorted volume. Second and third channel can both be boosted with a “lead boost” to obtain an over the top saturation and still keeping the dynamics and clarity between all the strings. It can cover any sound between crystal clean to the most thorough lead.
SPECIFICATIONS
- Clean Channel: inspired by the early ‘60s single channel amplifiers. Volume, gain, high, middle and bass and a bright switch. Simple and functional controls;
- Vintage Channel: inspired by the vintage distorted “plexi sound”. A true sonic nirvana. From semi-clean tones to a powerful crunch with only the use of your right hand, all in a single channel. Volume, treble, middle, bass, gain, bright switch, and lead boost;
- Modern Channel: A modern distorted high gain sound. It shares the eq with the Vintage channel, but has dedicated volume and gain controls. Volume, treble, middle, bass, gain, bright switch, and lead boost;
- High-voltage buffered effects loop; Double Master volume, for two steps of volume;
- MIDI communication (PC and CC) with intelligent internal saving;
- 100W of total output with EL 34 or 6L6 of your choice;
- Power and signal transformers designed by our specifications, made in Italy;
- Entirely designed, created, produced and assembled by hand in Italy by RedSeven Amplification;